Roof Thermal Insulation System
The CIS roof assembly consists of a system of components that fulfill the requirement of slope, waterproofing, solar insulation, support, control, and finish function of the building envelope. While the precise placement and configuration of each component may vary between climates and individual buildings, the following components are typically found in the roof assembly (from top to bottom)
R Value: 0.574 m2.K/W K Value: 0.087 W/m.K Thickness: 50mm
Previous
Next
Packaging
50 Kg Insulmix Screed Bag
Coverage:
15 sq. ft/ Bag (50kg) with a thickness of 25mm.
(Coverage depends on actual surface)
RCC Mother Slab
Flat Roofs
New Roofs
Old Roofs
Floors
Roof Retrofitting
CIS ROOF ASSEMBLY
A Cool Roof coatings consists of a binder (usually an organic compound or silicone compound) blended with pigments and other additives to provide two main benefits: protection of roof membranes for longer roof life cycles; and reflectivity of solar radiation, for lower air conditioning costs.
The main components of most Cool Roof coatings are the binder, pigment, water and reflective pigments. Water serves as a liquid carrier, which provides viscosity, allowing the pigment and binder to be spread on the roof as a thin coating. The majority of white coatings in use today are water-based coatings
An energy efficient , white, reflective, elastomeric coating manufactured by Panache can reflect up to 92% of visible light, keeping the roof surface much cooler than with aluminum, black, or non-reflective roofing materials. Lower temperatures mean less energy usage, and translate to money saved. Elastomeric roof coatings protect the roof substrate adding years to your roof, plus saves against costly tear-offs and re-roofing.