GREEN RATING CONTRIBUTION by PANACHE (LEED, IGBC.GRIHA, PEARL)
Complete Roof Cooling Insulation & Waterproofing Solutions
Panache provides with cooling solutions for all type of roofs& all type of materials – Flat & Slant Roofs; INDUSTRIAL CORRUGATED ROOFS; metal, concrete, wood etc.
- Panache’s Cool Roofs:Highly Reflective, High Albedo Cool Roofing System comprises of application of layers of coating with – (MX Cool Guard + Mx Cool Top + TranSeal)
- Over Deck Insulation:CIS Roofing System (Cool Insulated Sustainable Roofing System), (CIS Roofing System of Panache provides with Waterproofing on RCC + Insulated Screeding + Chemical Waterproofing at different levels of system + Cool Roofing)
- Waterproofing & Cooling:Chemical Waterproofing & Cooling system
Credits & Points Contribution By Panache Products For LEED Rating!
- Interior Wall
- Value Proposition: Low VOC and High LRV
- Product Name: Sheen Wrap
- Application Scope: All types of interior walls
- 89% LRV (Light Reflectivity value: determines brightness in room)
- Higher LRV implies: In case of sensor based lighting, energy efficient and in case of normal lighting one might have to switch on lights later in the evening thus leading to energy savings
- Green Rating Specification
- Use paints with low VOC content to the extent of 100% of interior wall surface area.
- Click to know more
- Exterior Wall Coating
- Value Proposition: Low VOC, High SRI (Solar Reflectivity Index), Reduce heat Island effect
- Product Name: Cool Wrap Application Scope: All Exterior Walls
- For green buildings Specification: SRI > 75
- Tested At
- Singapore TUV Test: SRI 107
- Ahmedabad (CEPT): SRI 109
- Silicone technology – better adhesive; better algae – fungus resistance; better dust repellence & water repellence.
- Elastomeric property adds to prevent crack development.
- Nano technologic components lead to better UV resistance & UV stability.
- Water base formulations add value to preserve environment
- Warranties offered by Panache: 3 -5 years (life is > 5 years)
- Competing companies offer warranty ranging from 2-5 years
- No quantitative parameter available at this point to quantify durability. Practical site exists since 7 – 8 yrs.
- Green Rating
- Reduce heat Islands to minimise impact on microclimate
- Increase thermal comfort of the occupant
- Click to know more
- Salt Resistant Primer
- Value Proposition: Low VOC , dampness resistant & salt efflorescence resistant primer
- Product Name: Seal Prime
- Application Scope: Below interior wall & exterior wall paint
- Salt resistance implies: Reduced paint peel off , reduced repaint , renovation cost
- Green Rating Specification
- Singapore TUV Test: SRI 107
- Use products with low VOC content to the extent of 100% of interior wall surface area.
- Click to know more
- Panache’s Cool Roof System
- Mx Cool Guard – Base Coat
- Mx Cool – Reflective Top Coat
- TranSeal – Top Most Dust Repellent Coat
- Value Proposition: High SRI (Solar Reflectivity Index), Reduce heat Island effect
- Application scope: All types of Roof – flat, slant, corrugated, cement, metal, asbestos.
- For green buildings: SRI > 75
- Tested At
- Singapore TUV Test: SRI 107
- Ahmedabad (CEPT): SRI 109
- Silicone technology – better adhesive; better algae – fungus resistance; better dust repellence & water repellence.
- Nano technologic components lead to better UV resistance & UV stability.
- No quantitative parameter available at this point to quantify durability; Practical site exists since 7 – 8 yrs.
- Green Rating Specification
- Optimise energy efficiency of the building by reducing AC consumption thus conserving energy
- Reduce heat Islands to minimise impact on microclimate
- Click to know more
- INSULATION – CIS Roofing System – (Cool Insulated Sustainable Roofing System)
- Value Proposition: Reduced U value of composite with reduced conductivity of the insulated mortar & the system implicated.
- Product Name: Insul Mix
- Application Scope: Installation above RCC for insulation, waterproofing and cooling
- For green buildings: You value of roof composite < 0.50 w/ m2 K (In IGBC) and for ECBC <0.40
- Tested At
- Nirma University ( Ahmadabad )- K Value of insulmix – 0.087 w/ M-k
- Green Rating
- Optimise energy efficiency of the building by reducing AC consumption to reduce environmental impacts from excessive energy use.
- Performance based approach ( Include Building energy simulation results, U value of roof assembly, wall assembly, lighting power density)
- Click to know more
- Waterproofing
- Value Proposition: Low VOC
- Product Name: Sealing slurry
- Application Scope: vertical and horizontal area.
- Elastomeric polymerized water proofing coating
- Green Rating Specification
- Use paints with low VOC content to the extent of 100% of wall and roof surface area.
- Click to know more
- Regional Material Availability
- Green Rating: Ensure at least 20% of the total building materials by cost used in the building should have been manufactured within in radius of 400 km.
- Click to know more
- Water Base Wood Finishes
- Value Proposition: Low VOC / water base
- Product Name: Timber Seal EP
- Timber PU Coat
- Timber Seal PU Coat
- Timber Conditioner
- Application Scope: All wood structures – interior & exterior
- Green Rating Specification
- Use paints with low VOC content to the extent of 100% of wall and roof surface area.
- Click to know more